车用轴流式冷却风扇设计分析.docxVIP

车用轴流式冷却风扇设计分析摘要：冷却风扇对于汽车来说十分的重要，伴随着人们对汽车要求越来越高以及现在的技术也慢慢的进步，一款合适的冷却风扇就显得尤为重要。一款性能合适的冷却风扇不仅能使汽车在任何工况下都能正常工作还可以提高汽车的燃油经济性同时达到节能减排的效果。所以一个好的冷却风扇对于一辆一车来说很重要。文章根据冷却风扇的设计步骤对冷却风扇进行分析设计然后在绘制出CAD图像。风扇选型与风扇类型的匹配在基本要求分析中进行了研究，风机是基本参数的确定，讨论了风扇和冷却系统的运行方式，以及风机性能的匹配是好还是坏 判断和选择一个散热器风扇进行匹配。 在风扇CAD建模设计和分析主风机的配套结构设计中，主要分析冷却风扇叶片设计和绘制CAD三维图形。 通过对上述研究设计的分析，得出了轴流冷却风扇结构设计的设计。关键词：发动机轴流式冷却风扇，匹配，造型设计Design?analysis of car shaft flow cooling fanAbstract：Cooling fan is very important for car, along with people is higher and higher requirement for the car, and now the progress of the technology is also slowly, an appropriate cooling fan is particularly important. A suitable cooling fan performance not only can make the car can work normally in all conditions can also improve the automobile fuel economy at the same time to achieve the effect of energy conservation and emissions reduction. So a good cooling fan is important for a car.The paper analyzes the cooling fan and then draws the CAD image according to the design step of the cooling fan. Selection of the fan and fan type match in the analysis of the basic requirements are studied, the fan is the determination of basic parameters, operation mode of the fan and the cooling system was discussed, and the fan performance matching is good or bad judgment and choice of a radiator fan match. In the design of fan CAD modeling and analysis of the supporting structure of the main fan, the design of cooling fan blades and the drawing of CAD are mainly analyzed. Through the analysis of the above research design, the design of axial cooling fan structure design is obtained.Keywords：Engine axial flow cooling fan，matching，modelling design目录摘要ⅠAbstractⅡ目录III1绪论11.1 前言11.2 发动机冷却风扇的国内外研究现状11.2.1 发动机冷却风扇的发展现状11.2.2 发动机冷却风扇设计的研究现状31.3 论文的意义42 风扇选型与匹配62.1 发动机冷却系统的功用及结构62.1.1 冷却系统的功用62.1.2 冷却系统的组成62.2 发动机冷却风扇的功用与性能参数72.2.1 冷却风扇的作用72.2.2 冷却风扇的类型72.2.3 冷却风扇的基本性能参数92.3冷却风扇的选型与匹配102.3.1冷却风扇的选型102.3.2冷却风扇的要求112.3.3发动机冷却风扇的基本参数的确定112.3.4 风扇与冷却系统的匹配142.4本章小结173 风扇造型 CA