创维彩电通病（Skyworth color TV disease）.doc

创维彩电通病（Skyworth color TV disease） 1. The 25NL9000 color color TV of the 5T20 machine has been shown only a few minutes after it has been turned on. It is caused by CPU damage. - 2, 5 t20 movement 29 nl9000 color TV appeared not boot, but red light failure, because R610 resistance tolerance caused by the 100 Ω into 500 Ω. - 3. The 29AT9000 color TV of the 5T20 machine has no character in the blue screen, and the failure of control failure is caused by the failure of C026. - 4. 5P10 machine core 8000-2582a color TV set up blue screen, no picture silent, but there are raster, but the grating dissatisfaction screen failure is due to the color subcarrier 4.43 MHz crystals. - 5. The 8000y-2188 of the machine core of 3Y01 is out of line, and the failure is caused by the damage of IC203 - L7805. - 6. The image compression of the 8,000-2199 color TV in the 4N10 machine was caused by the failure of the IC301 - L7809. - 7. The green failure of the 800s-2588 color TV in the machine core is caused by the leakage of C219. - The failure of 8000n-2199 color TV in the 8000N - 2199 of the machine core is caused by the leakage of C409. - The failure of the white screen return line of the 2582 color TV in the 5P03 machine was caused by the damage caused by the resistance of R514 (220K). - 10. The 8000-c2582 color TV of the 5P30 machine has the failure of the output pipe of the power burning line, which is caused by the smaller C327 capacity. - 11. The 2522 color TV of the 5T01 machine core was caused by the damage caused by R329. - 12. The 222 color TV of the 3Y20 machine core has been switched on, but the red light failure phenomenon is caused by the reduction of the cpu-lc863320 reset due to the decrease of the cpu-lc863320. If the + 5V power supply is added to the CPUs 7 feet, the screen will appear to be dim and the factory menu and a key symbol alternately flicker on the screen 13, 5 p20 movement 34 sd9000 color TV boot turn blue range compression mimeograph machine after dark, is