一塌胡涂（A cat dragged）.docVIP

一塌胡涂（A cat dragged） Update time: 2007-12-9 16:01:25 browsing times: 2099 Thick stick failure Printed matter and drum axial parallel, gradation striation mark two-tone, called printing bar, commonly known as thick stick, sliver, line, TiaoTou, this is a common and difficult to solve in offset lithography printing fault. If the bar is mild, it will not affect the overall picture, but if it is serious enough to affect the accuracy of the image, the effect or the customer is not acceptable, it must be eliminated. Complete exclusion is not easy, or even impossible, to minimize the impact. The bar is often caused by a number of factors, which can be difficult to identify and eliminate at once. According to the phenomenon and characteristics of thick stick can be divided into two situations: one is the ink, dot occur irregularly enlarged, elongate, ghosting, inky is aggravating, formed a distinct dark streaks, known as the color bar, usually in printing lines, text, dot image and field occurs; Second, water, and in the presence of a thick stick, image dot occur irregularly narrowed, constitute a significant light streaks, called water bar, also known as white bars, and colorless white bar is also caused by ink layer thinned or network to reduce the print change. The above two kinds of bars are caused by the surface contact of the printing plate, such as rubber cloth and water roller. The cause of the bar Due to the plate cylinder and embossing roll gap with a collision, impact working face in the process of transformation, CAM and connecting rod mechanism under the effect of inertia vibration, and drum cylindrical surface uniform uniform rolling, no longer do so between the ink roller and plate, between plate cylinder and rubber roller, rubber roller and embossing roller, all can produce tiny slip, and destroy the ink balance, because the ink layer rupture and affect the ink layer thickness, increased or reduced, and the branch in parallel to the axis of the drum. The high