塑料注射模具机构设计动画演示200例（The plastic injection mould mechanism was designed for 200 cases）.docVIP

塑料注射模具机构设计动画演示200例（The plastic injection mould mechanism was designed for 200 cases） The plastic injection mould mechanism was designed for 200 cases The data compilation of the different types of plastic injection mould design example is given to more than 200, will each instance of the working principle and working process of design and manufacture a Flash animation, according to a rally in the demo CD album directory number. Each animation is accompanied by a text description, an actual structure, and a more detailed description. The reader can easily to demonstrate the CD for learning tools, simulated the process of mould institutions, through animation to help understand the design principle and method of atlas of the structure and text can make it easier for readers to use. This demo cd-rom can be used as a mold professional courses teaching and learning resources, not only suitable for the mold of the teacher in the classroom teaching for teaching demonstration, also suit to design for professional students in individual study, of course is also available for factory worker on-the-job training and engineering technical personnel design reference. directory 1 typical structure of injection mould 1.1 single parting surface injection mold 1.2 double parting surface injection mold 1.3 injection mold with activity inserts 1.4 horizontal parting core injection mold 1.5 automatic unthreaded injection mold 1.6 multi-layer injection mold 1.7 heat flow road injection mold 2 dewatering mouth mechanism 2.1 incubation gate 2.1.1 push rod top exit gate 2.1.2 differential push-rod top exit gate 2.1.3 different push rods are respectively introduced and cut off 2.1.4 push plate and push rod are respectively introduced and cut off 2.1.5 shear cut off gate 2.2 the gate 2.2.1 ejector gate 2.2.2 use the inclined hole to pull the gate 2.2.3 plate type dewatering hole 2.2.4 plate type dewatering hole two 2.2.5 plate type dewatering hole three 2.2.6 plate type dewatering port 4 2.2.