连铸结晶器多变量系统建模及控制 - 中南大学学报.pdf

42 5 () Vol.42 No.5 2011 5 Journal of Central South University (Science and Technology) May 2011 1 2 3 (1. 100044 2. 454000 3. 100083) (ADRC) ADRC TF341.6 TP273 A 1672−7207(2011)05−1361−08 Modeling of mould multivariable system in continuous casting process and its control 1 2 3 LI Zhuang-ju , WANG Yun-jian , XIAO Lei (1. School of Electric and Information Engineering, Beijing University of Civil Engineering and Architecture, Beijing 100044, China; 2. School of Electrical Engineering and Automation, Henan Polytechnic University, Jiaozuo 454000, China; 3. School of Information Engineering, University of Science and Technology Beijing, Beijing 100083, China) Abstract: To realize the control of the shell thickness at the mould exit control in continuous casting process, the solidification and heat transfer process in mould were simulated, a model of shell growth was founded and the relationship between shell thickness-temperature at the mould exit was established through finite element analysis and curvilinear regression method. Based on this model, a nonlinear multivariable mode of the mould system was built with its inputs (i.e., casting speed