ARM字符驱动实例.pptVIP

字符驱动实例 本实验电路图 驱动程序 #include linux/kernel.h #include linux/module.h #include linux/init.h #include linux/fs.h #include linux/cdev.h #include linux/ioport.h #include asm-arm/io.h #include linux/ioctl.h #include linux/interrupt.h #include linux/delay.h #include linux/timer.h #include asm/irq.h #include linux/param.h #include linux/sched.h #include linux/errno.h #include asm/signal.h #define CDRIVER_NAME LED_chrdev #define GPFCON (0 #define GPFDAT (0 #define GPFUP (0 static void *gpfcon; static void *gpfdat; static void *gpfup; int CDRIVER_MAJOR=0; int CDRIVER_MINOR=0; int count=1; loff_t LED_llseek (struct file *filp,loff_t off,int whence); int LED_ioctl(struct inode *inode,struct file *filp,unsigned int cmd,unsigned long arg); int LED_open(struct inode *inode,struct file *filp); int LED_release(struct inode *inode,struct file *filp); extern struct file_operations LED_fops; struct cdev *LED_cdev; dev_t LED_dev; struct file_operations LED_fops= { .owner =THIS_MODULE, .llseek =LED_llseek, .open =LED_open, .release=LED_release, }; static int __init LED_init(void) {…… if(!request_mem_region(GPFCON,12,CDRIVER_NAME)){ printk(KERN_ERR LED:io%X is not free.\n,GPFCON); return -EBUSY; } gpfcon=ioremap_nocache(GPFCON,4); gpfdat=ioremap_nocache(GPFDAT,4); gpfup=ioremap_nocache(GPFUP,4); if(!gpfcon){ printk(KERN_ERR LED:ioremap failed\n); iounmap(gpfcon); return -EINVAL; } if(!gpfdat){ printk(KERN_ERR LED:ioremap failed\n); iounmap(gpfdat); return -EINVAL; } if(!gpfup){ printk(KERN_ERR LED:ioremap failed\n); iounmap(gpfup); return -EINVAL; } return 0; } int LED_open(struct inode *inode,struct file*filp) { printk(LED Device is opened\n); writel((readl(gpfcon)(114)), gpfcon); writel((readl(gpfup)(17)), gpfup); writel((readl(gpfdat)(07)), gpfdat); ssleep(1); writel((readl(gpfdat)(17)), gpfdat); ssleep(1); writel((readl(gpfdat)(07)), gpfdat); try_module_get(THIS_MO