装饰装修-吊顶工程（Decoration - ceiling works）.docVIP

装饰装修-吊顶工程（Decoration - ceiling works） Seal sample after confirmation. Approach II supplier or the construction unit materials must be submitted at the same time, the factory quality certificate and test report of formal verification approval to import materials supervision, commodity inspection departments must provide inspection report, and submit a photocopy of the supervision. The sampling process of 3 materials and products after entering and materials, construction, construction and supervision must be made by the three party (or the construction and supervision of two parties) jointly staging batches, specifications of sampling, send out according to the test report with the qualification certificate of inspection unit * test, test report timely to the supervisory approval after verification the archive, the test after the products and materials and parts * to use, materials and products and processing of unqualified shall not be used for the project, and shall not be deposited in the field, must be evacuated in the supervision notification period, unilateral sampling is invalid, if there is doubt, the supervisor can random sampling. The sampling period is long for materials, products or parts, suppliers or construction units must advance 7 to 15 days after passing to the daily supervision and sampling, supervision verification can be set before use, unilateral sampling is invalid. 1. gypsum board ceiling The location of the ceiling line is accurate, the standard deviation is 5mm, the check is qualified, the form is signed and signed, and the supervision is checked and accepted. After the approval of the supervision and acceptance, it can enter the next process construction. Whether the number and location of the decorative ceiling hanger unit self check to meet the requirements of design or specification, and brush two times anti rust paint, self qualified daily supervision and acceptance, supervision acceptance after the signing, in order to enter the next p