mhdd4.6使用方法（Mhdd4.6 usage）.doc

mhdd4.6使用方法（Mhdd4.6 usage） MHDD 4.6 usage Recommend a hard disk inspection tool - MHDD Recommend you later use MHDD to detect hard disk, very accurate. I put the T23 to local suck JS, JS detect the hard disk using this tool to check the suspected bad sectors 4 access time more than 500ms, the 17 track access time between 150~500ms. If you use HD Tune, none of this will be found. Floppy or CD-ROM can be used as a carrier, under the DOS detection, can definitely find a lot of HD Tune left out of the question. Attached: directions for use on the internet! Hard disk professional inspection and maintenance software MHDD usage 1, MHDD is a Russian Maysoft company produced professional hard disk software has powerful function of many other hard disk tool software can not match, it is divided into the full version of the free version and fees, this paper introduces the detailed usage free version. 2, whether in CHS or MHDD in LBA mode, you can access to large capacity hard disk 128G (sector range from 512 to 137438953472 can be accessed), even if you use the 286 computer, without BIOS support, without any interruption of support; 3, MHDD is best run in pure DOS environment; 4, MHDD can not rely on the motherboard BIOS direct access to the IDE port, but be careful not to use the original Intel brand motherboard; 5, do not run MHDD on the hard disk you want to detect; 6 and MDD need to record data at runtime so that they cannot be run in a write protected storage device (such as write protected floppy disks, CDs, etc.); MHDD command detailed EXIT (hotkey Alt+X): quit to DOS. ID: hard disk detection, including hard disk capacity, head number, sector number, SN serial number, Firmware firmware version, LBA, DMA, numerical support level whether to support the HPA, support AAM, SMART level and switch mode switch state, state security...... Et al.). INIT: hard disk initialization, including Device, Reset (hard disk reset), Setting, Drive, Parameters (setting the hard disk paramete