ping的用法（The use of Ping）.docVIP

ping的用法（The use of Ping） The Ping command can test the computer name and IP address of the computer, the computer connected with each other solemnly, to the other host by sending ICMP echo request message (ICMP) to verify the connection of IP and other TCP/IP computer. The reception of the echo response message is displayed along with the number of times of the round-trip process. Ping is the primary TCP/IP command for detecting difficult problems of network connectivity, reachability, and name resolution. If no arguments are used, Ping will display help. Ping This should be used by everyone, the most important thing is to test whether the target host is connected. The Ping program actually sends a ICMP echo request message to the destination host and waits for the ICMP response to be returned. Then print back the message. Ping is an address, does not necessarily mean that the IP does not exist or not connected to the network, because the other host may have restrictions, such as the installation of the firewall, so the Ping barrier does not express FTP or TELNET connection cannot be used. The results obtained by PING include bytes, response time, and lifetime. The Ping program calculates the return time by storing the time of the sending request in the ICMP message data. When the response is returned, the response time is received by subtracting the sending time from the message at the present time. Lifetime (TTL), originally stored on the head of the IP datagram, is available directly. The last time and Dancefire said that when Skynet firewall, now not Skynet can identify program in the network connection, while using Ping test results, Skynet will not know, oh, anyway, there is no warning. That ICMP Trojan Skynet can prevent Mody? parameter -t Specifies that Ping can continue to send the echo request information to the destination before the interruption. To interrupt and display statistics, press CTRL-BREAK. To interrupt and exit Ping, press CTRL-C. -a Specifies