光电耦合器（Optocoupler）.doc

光电耦合器（Optocoupler） Anti jamming technology of photoelectric isolation and its application Category: electronic comprehensive reading: 1217 In the electronic circuit systems, inevitably there are various interference signals, if the circuit anti-interference ability will lead to a decrease in the measurement and control accuracy, malfunction, resulting in devastating consequences. Therefore, if some design techniques are used on the hardware, the anti-interference ability of the system can be effectively improved by destroying the approach of interfering signals into the measurement and control system. It has been proved that isolation technology is a simple and effective method. Isolation technology is the destruction of interference method, the hardware used photocoupler isolation electricity to light to electricity, he can enter effectively destroy the interference source, to achieve reliable signal isolation, and easy to form the various functions of the state. 1 introduction of photoelectric coupling device The photoelectric coupling device assembles the light emitting devices (such as light-emitting diodes) and photosensitive devices (such as photosensitive triode) together to form a converter of an electric light and an electric light through the coupling of light. Figure 1 shows the commonly used triode type optocoupler schematic. When the electrical input signal give photoelectric coupler, light emitting diode and light emitting current through the photosensitive element, by light generated current, CE conduction; when the input signal, the light emitting diode light, photosensitive triode, CE. For digital quantity, when the transmission is low 0, the phototransistor is cut off and the output is high. 1; when the output is artificially high 1, the phototransistor is saturated and the output is low 0. If the base has a lead out line, it can meet the temperature compensation and detection modulation requirements. The optocoupler is good in performance and chea