堆焊简要（Surfacing briefly）.doc

堆焊简要（Surfacing briefly） Use: used for welding gear, excavator, tractor scraper, deep plowing plow, mining machinery wear parts. D177SL surfacing electrode Application: used for welding single or multi-layer aluminized steel by wear parts, such as power station, aluminized steel, boiler, economizer pipe, etc.. D707 surfacing electrode type: EDW-A-15 Application: it is used for overlaying mechanical parts, such as concrete mixer, blade, bulldozer, dredger blade, high-speed sand mixing box and so on. D707Ni surfacing electrode Uses: for anti high temperature oxidation, wear resistant material, such as blast furnace bell, sintering, picking teeth and so on. D717/D717A surfacing electrode type: EDW-B-15 Application: it is used for overlaying the machine parts with strong resistance to rock wear, such as the grip of the three cone bit, the blower blade, the powerful coal mining roller, the sugar binding machine roller, the concrete mixer blade and so on. D102 surfacing electrode type: EDPMn2-03 Application: used for surfacing or repairing low carbon steel, medium carbon steel and low alloy steel wear parts, such as axle, gear and mixer blades, etc.. D106 surfacing electrode type: EDPMn2-16 Application: used for surfacing or repairing low carbon steel, medium carbon steel and low alloy steel wear parts, such as axle, gear and mixer blades, etc.. D107 surfacing electrode type: EDPMn2-15 Application: used for surfacing or repairing low carbon steel, medium carbon steel and low alloy steel wear parts, such as axle, gear and mixer blades, etc.. D112 surfacing electrode type: EDPCrMo-Al-03 Uses: used for low carbon steel, medium carbon steel and low alloy steel, especially for welding and repairing of mining machinery and agricultural machinery. D126 surfacing electrode type: EDPMn3-16 Application: used to weld low worn, medium and low carbon steels, such as axles, gears and mixers, blades and walking wheels. D127 surfacing electrode type: EDPMn3-15 Application: used to weld lo