安全监控系统防雷保护设计浅谈（Discussion on lightning protection design of safety monitoring system）.docVIP

安全监控系统防雷保护设计浅谈（Discussion on lightning protection design of safety monitoring system） Discussion on the design of lightning protection safety monitoring system I. Introduction Along with the development of safety monitoring system in warehouse management, transportation, bank area, the rapid spread of the application of equipment monitoring system because of the possibility of lightning damage is greatly increased. The consequences may cause the whole system failure, and caused incalculable economic losses. In order to take effective lightning protection measures of safety monitoring system, the normal operation of reliable security monitoring system, should be the main reason of invasive approach may clear monitoring system lightning damages and lightning, especially outdoor lightning damage monitoring equipment more serious, based on analyzing the causes of damage, the correct selection and lightning protection device the use of equipment monitoring system, and the research and discussion of signal and power line laying, shielding and grounding etc.. Can the security engineering company, to improve the monitoring system of anti lightning, lightning protection level optimization system plays a very good role. The composition and origin of lightning two, closed circuit monitoring system. 1, TV monitoring system (ClosedCircaitTelevisiow, CCTV), generally consists of three parts: The front part is mainly composed of black and white (color), camera lens, Yunnan, protective cover, a support bracket. Transmission parts: using coaxial cable, electric wire, multi-core wire, ground or take the overhead transmission along the wall laying way of video, audio or signal control etc.. The terminal part is mainly composed of image segmentation device monitor and control equipment etc.. 2, the CCTV system of lightning causes Lightning: lightning strike directly cause damage to the equipment in the open the camera; direct lightning strike caused the fuse in overhead wire cable. Lig