高层建筑框架梁柱节点的强度验算和施工处理（Strength calculation and construction process of high-rise building frame beam column joints）.docVIP

高层建筑框架梁柱节点的强度验算和施工处理（Strength calculation and construction process of high-rise building frame beam column joints） Strength calculation and construction of.Txt beam column joints of high-rise buildings framework of the mature heart is not getting old, but the tears still smile in the eyes. All the extraordinary things is not trivial, all simple things is not easy to. Strength calculation and construction process of high-rise building frame beam column joints [Abstract] the high-rise building frame beam column joints of concrete pouring and how to meet the requirement of bearing capacity, has long been a problem puzzling the design and construction personnel, according to the high standards provisions of qualitative, quantitative calculation and summed up by a simplified joint method, hope to get peer recognition and accepted and applied in practical engineering. [Key words] compressive shear strength of concrete joints 1 code excerpt In the technical specification for concrete structures of tall building (JGJ3-2002), and the design of pouring concrete frame beam column joints that have provisions and provisions of the following: When the design strength of concrete column is higher than the design strength of beam, slab, beam column joints of concrete construction should take effective measures (article 13.5.7); - high-rise buildings with different strength of beam column joints of concrete pouring to relevant units specific consultation (provision); - seismic design, one or two frame joint core zone should be carried out according to the seismic analysis of appendix C of this specification; the top end node in the core area of three or four level frame nodes and different seismic grades, not seismic checking (section 6.2.7). Usually the strength of concrete beam column joints of lower strength concrete columns more, must be carefully checked the bearing capacity of joints, including shear, axial compression and eccentric compression, and take effective measures to