钢筋混凝土框架结构施工常见问题剖析（Analysis of common problems in construction of reinforced concrete frame structure）.docVIP

钢筋混凝土框架结构施工常见问题剖析（Analysis of common problems in construction of reinforced concrete frame structure） Analysis of common problems in construction of reinforced concrete frame structure Abstract: residential reinforced concrete frame structure refers to the reinforced concrete pouring into the load-bearing beams and columns, the use of precast concrete filling, expanded perlite, pumice, vermiculite, pottery and other light rotten plank partition household and housing assembly. Suitable for the construction of large-scale industrialization, higher efficiency, better quality of the project. The frame structure consists of beam column structure, smaller section component, so the structure bearing capacity and stiffness is low, its force characteristics similar to the vertical cantilever shear beam, the higher floors, the horizontal displacement of the slower frame are subjected to horizontal force, the two directions of this, cast as the work floor beam, prefabricated floor effect is not considered, the frame structure of the wall is filled wall, separated from the envelope and the function characteristics of frame structure is to provide a flexible use of space for the building, but the poor seismic performance. Aiming at the common problems, the reason analysis, put forward the countermeasures, make the construction can meet the requirements of the standards, to ensure the quality of the project. The 1 RC beam and column protection layer thickness of The protective layer thickness of protective layer thickness is usually the main reinforcement, some construction workers literally would mistake it for the most lateral reinforcement to the component template (i.e., stirrup lateral) even stretching lateral distance to the template. Effect of reinforced protective layer is to ensure that a reinforced concrete bond, make the two work together; the two is to consider the durability of steel reinforced concrete protection, to prevent cracking after oxidation corrosion, and m