阀体简介（Body profile）.docVIP

阀体简介（Body profile） valve body Body material: Cr18Ni2Mo2Ti body.: valve English Is one of the main parts of the valve; according to the pressure level have different mechanical manufacturing methods. For example: casting, forging etc.. The body is usually used in production specifications low pressure casting process. The body of high pressure by forging production specifications. Together to form a seal can effectively withstand the media pressure and the valve core and valve seat ring. The body of the material according to different process medium, selection of different metal materials. Commonly used materials: cast iron, cast steel, stainless steel and carbon steel. The definition of a valve: Valve is defined in the flow system, device used to control the flow direction, pressure and flow. The valve is the piping and equipment within the media (liquid, gas, powder) device can control the flow or stop the flow, and the. Two open and close the valve according to different functions, many classification methods of the valve, introduced here the following types. 1. according to the role and use classification (1): also known as cut-off valve cut-off valve closed valve, whose role is to connect or cut off the medium in pipeline. Cut off valve including the valve, globe valve, plug valves, ball valves, butterfly valves and diaphragm. (2) check valve: Valve called one-way valve or check valve, its role is to prevent the media back in the pipeline. Pump water off the bottom valve check valve also belongs to class. (3) the safety valve safety valve: the role is to prevent the medium pressure pipe or device exceeds the set value, so as to achieve security objectives. (4): regulating valve regulating valves including control valve, throttle valve and pressure relief valve, and its role in the regulation of the medium pressure, flow parameter. (5) shunt valve: the shunt valve including distribution valve and drain valve, whose role is assigned, the line of separation or mixe