模型制作细则（Model making rules）.docVIP

模型制作细则（Model making rules） Model making rules specification A, the apartment layout 1, the map: CAD existing drawings to cut, to do basic form for reference (quasi objective to reduce the amount of files into the max) if not to face the horizontal and vertical elevation for the quasi; 2, material Each a object is assigned to the VR material, and according to the given real color (with light coloured); B material: material name named _ No. _ name _ project name (glass01_ A1_ kxf _D07049D) C window railing map name: material name _ No. _ name _ project name (windows01_A1_ kxf _D07049D.jpg). 3, wall A invisible wall closed (to avoid application of facade lighting through the air, through the glass was empty); B residential should have a certain height parapet, residential horizon should be at zero point on the vertical coordinate; C wall and wall joints do not produce heavy surface; (to render arrancar); D regular wall line can negotiate whether mapping and rendering, irregular wall line construction. 4, the window frame A can be set in a window unit, the window frame collapse into one object (without modification case); The number of B arc window corresponding to the glass should be the same, (so as not to close the dislocation shadow); C window should delete the invisible surface (back and side); In addition to D bay window by using the method of modeling in windows and doors. 5, glass In addition there are special requirements for a indoor work are single modeling, appear in the normal is not correctly face make law Command line reversal, no special requirements are made of VR. The attention of the B group and the main building, room glass balcony glass to separate modeling, were given their own material. , 7, balcony A balcony board with the corresponding edge molding material should be separated from the same balcony recommended Association in order to modify, copy, map railing made monolithic, done after the first map after the collapse of the balcony. 6, collaps