河北南网继电保护新安装检验细则（Inspection rules for new installation of relay protection in Hebei Southern Network）.docVIP

河北南网继电保护新安装检验细则（Inspection rules for new installation of relay protection in Hebei Southern Network） Inspection rules for new installation of relay protection in Hebei Southern Network 1 range This standard specifies the content and basic requirements of the new installation test of micro - type relay protection. This standard to relay protection and security automatic equipment inspection (DL/T995-2006) of the new relay protection installation inspection project basis, make a detailed explanation and description of each project, the project is divided into specific work of operation, and at the same time the inspection method and inspection requirements. This standard applies to the power supply companies directly under the Hebei electric power company, and the equipment for the operation and maintenance of EHV transmission and transformation branch is under the jurisdiction of the provincial dispatching administration, and carries out this standard. 2 terms and definitions 2.1 and two circuits Two: start from the terminal loop current and voltage transformer secondary side two to two times the circuit protection device; the DC electric screen terminals into the two loop on the protection device; the DC circuit protection device to control signal screen between the outlet terminal protection device; to jump, the closing circuit breaker terminal box; the non related two loop electrical protection. 2.2 non battery protection Protection of relays such as transformer, gas, temperature, non electrical quantity protection, exit, signal, etc.. 2.3 acceptance test of new installation Acceptance testing of new installations, referred to as new installation inspection, refers to the inspection carried out by the installation and commissioning units in order to ensure the normal operation of the protection, including the inspection of the equipment and associated circuits. Different from the factory acceptance test, it is different from the production and acceptance of the op