车间工作管理流程（Workshop management process）.doc

车间工作管理流程（Workshop management process） First, ensure that the equipment maintenance quality process: 1, reasonable collocation, specified responsibility. 2, the data must be accurate, measurement records must be written. 3, hot oil pump in the overhaul, preheating 100 C and 200 c, 280 C and 350 C hot. 4, maintenance records signed after the afternoon before work with the workshop, the workshop leaders continue to cycle to sign, after the hand tracking. 5, the maintenance records of each item must be comprehensive, and monitor by the workshop, by Wei Chenggang inspection statistics. 6, the existence of hidden equipment, do not have the conditions of processing, by filing a memo to monitor, after the repair out. The handle 7, equipment problems, must be timely feedback to the workshop staff on duty. 8, the key equipment maintenance after the test machine, there must be a deputy class above personnel responsible for. Two, the equipment maintenance plan: 1, large, medium and small in time and maintenance according to the memo, maintenance details. 2, the relevant plan in accordance with the provisions of the format is completed, by the monitor to the workshop, approved the implementation of audit. 3, the organization plans to overhaul the workshop before the safety plan of study and training. Three, equipment inspection process: 1, must ensure that the inspection team every day four times, inspection tools must be equipped with complete. The collective inspection daily at eight am to four PM between Lu Xun, effective once the monitor arrangement. Must check the quality inspection 2, monitor every day, on-site check table. 3, the monitoring equipment must be repaired within 24 hours, by the person responsible for the arrangement of monitor. 4, inspection must ensure that time, eliminate the hillock, monitor check. 5, every Monday to receive the inspection record. 6, workshop management personnel inspection of key equipment. 7, check the inspection personnel on duty that d