TR280型旋挖钻机液压系统设计.docVIP

中文题目：TR280型旋挖钻机液压系统设计 外文题目：THE DESIGN OF HYDRAULIC SYSTEM OF TR280 TYPE ROTARY DRILLING RIG 毕业设计（论文）共 页（其中：外文文献及译文 页） 图纸共 张 完成日期 20 年 月 答辩日期 20 年 月 摘要 本次毕业论文设计结合国内外旋挖钻机发展现状，综合运用所学专业理论知识深入研究TR280型旋挖钻机的工况特点，建立力学模型，分析各执行机构的负载。对TR280型旋挖钻机的钻进工况、主卷扬机构工况、变幅机构工况、上车回转机构工况、下车行走工况均进行了具体分析，根据各执行机构工况要求对各执行机构液压回路原理功能设计分析。结合已有旋挖钻机一般设计经验，对TR280型旋挖钻机液压系统主要参数设计计算，设计TR280型旋挖钻机液压系统，并依此为基础探索大型旋挖钻机液压系统设计研究方法。 通过本次毕业论文设计，对旋挖钻机的液压系统有了深入分析理解，对液压传动与控制专业理论知识综合运用有了扎实提高，为今后的工作学习奠定了良好的基础。 关键词：旋挖钻机；液压；设计；工况分析；参数计算 Abstract This graduation design combines with development present situation of rotary drilling rig at home and abroad, the comprehensive use of the learning condition of knowledge in-depth study of TR280 type rotary drilling rig of professional theory, establish the mechanical model, analysis the load of each actuator. Type TR280 rotary drilling rig drilling condition, main hoisting mechanism, luffing mechanism, on the condition of working conditions, rotary mechanism off walking conditions were analyzed, based on the principle of hydraulic actuator loop design requirements of each actuator condition analysis. Combining with the existing rotary drilling rig design experience, design and calculation of the main parameters of hydraulic system of drilling rig digging on TR280 type rotary, the design of TR280 type rotary drilling rig hydraulic system, and then on the basis of large rotary drilling rig hydraulic system design methodology. Through this graduation design, hydraulic system of rotary drilling rig is analyzed deeply understanding of hydraulic transmission and control, comprehensive use of a professional theoretical knowledge and improve, has laid a good foundation for the future work of learning. Key words: The rotating drill ；Hydraulic ；Design；Working condition analysis；Parameter calculation 目录 前言 1 1 国内外旋挖钻机发展状况及前景 3 1.1 国外旋挖钻机发展状况 3 1.2 国内旋挖钻机发展状况 5 2 旋挖钻机结构组成与工作原理研究 7 2.1 旋挖钻机主要结构整机布置 7 2.1.1 行走装置 7 2.1.2 回转平台 8 2.1.3 变幅装置 8 2.1.4 卷扬机构 8 2.1.5 工作装置 8 2