autocad应用技巧44例（autocad应用技巧44例）.docVIP

autocad应用技巧44例（autocad应用技巧44例） 44 examples of AutoCAD application skills 1. in AutoCAD, sometimes cross points are generated at the click of a mouse. Using the BLIPMODE command, typing OFF at the prompt line eliminates it. 2., some users use AutoCAD, you will find that the dialog box in the command will become prompt, such as print commands, control it is the system variable CMDDIA, Just turn it off. The ellipse generated by the 3. ellipse command takes the polyline or the ellipse as the entity, is determined by the system variable PELLIPSE, and when it is 1, the ellipse is generated Its PLINE. The 4.CMDECHO variable determines whether the command line echo is generated, which should be set to 0 in the program execution. 5.DIMSCALE determines the proportion of dimensioning, which is integer, defaults to 1, and when the graph has a certain proportion of scaling, it is best to change it to shrink Proportion. The 6.BREAK cuts off two points of the entity and, when selected at second, such as @, can be separated by the first entity. In the higher version of 7.CAD The geometric tolerances are provided, but the roundness and coaxiality are not round enough. In fact, the common symbol definitions in AutoCAD are under the AutoCAD installation directory In the gdt.shp file under the SUPPORT subdirectory, 2 and 4 characters define the shape of a circle. The arc of the circle is actually 127 degrees, but not very good Correct (as for 90 degrees less beautiful). 8. hollow Chinese fonts, such as the use of AutoCAD R14 BONUS function (must be fully installed AutoCAD, or custom installation selected it), there are A TXTEXP command that can text text into a line, very useful for making three-dimensional characters. 9.AutoCAD R14 BONUS, there is a ARCTEXT command, can achieve arc text output, the use of methods for the first choice of arc, and then enter the text Rong, press OK. There is also a useful command in 10.BONUS, MPEDIT, that uses it to modify multiple lines into a polyline