kz（KZ）.docVIP

kz（KZ） Planar structures of stereographic projection for ________________; Linear structure of the stereographic projection for ________________; Joint or fault strike rose reflect faults _____________ orientation; The tendency and slope of the planar structure to the contrary, planar structures in the outcrop line topographic geological map and terrain contour is same to the shape of V, but the curvature of planar structures than the outcrop line curvature _________ contour line; To dip like structure is greater than the slope angle, but the tendency is the same, the topographic geological map, planar structures and terrain contour line outcrop showed _____________; Face angle shaped structure is less than the slope angle, but the tendency is the same, the topographic geological map, planar structures and terrain contour line of outcrop manifested in the V shape, and the surface structure of outcrop line curvature ratio of curvature _____________ contour line; The level of rock outcrop line and terrain contour ______________; Upright rock outcrop line in topographic geological map is a __________ line; The outcrop line and terrain contour ___________ inclined strata; The terrain angle is constant, the dip angle is _____, the smaller the outcrop width; When ______________ formation, the vertical thickness is equal to the true thickness; In general, the apparent formation thickness of ___________ in the true thickness of strata; 1 sigma _______ said the principal stress; 2 sigma _______ said the principal stress; 3 Sigma _______ said the principal stress; Two perpendicular sections of the stress components corresponding to the two round of the _______ end force; Any of the two perpendicular cross section, normal stress and principal stress is equal to _______, has nothing to do with the section; The two section is the stress on the 1800, corresponding to the stress circle on the _______ point, so the stress components are exactly the same; The stress concentration re