plc应用（The application of PLC）.docVIP

plc应用（The application of PLC） Application of PLC in point control of NC lathe system 2007/8/21/09:37 source: China metal processing network I. Introduction Numerical control technology is a comprehensive application of the electronic technology, computer technology, automatic control and automatic detection of the achievements of modern science and technology develops, at present in many fields especially applied in the manufacturing industry is more and more widely. Numerical control system is divided into several position control system, linear control system and continuous control system according to its control mode. In machining, NC system position control commonly used in drilling machine (such as drilling, reaming, boring, CNC machine tool) is characterized in that the moving parts can be realized by a precise mobile location to another location, location is the accurate control of end point of moving parts, but not considering its trajectory, in the process of moving the workpiece cutting tool is not. Realization of digital control system can usually has two kinds: one is the numerical control device of full function, the device function is perfect, but its price is very expensive, and many of the features are redundant for point-to-point control; two is the use of single chip microcomputer control, this method in addition to software development also, the design of hardware circuit, interface circuit, drive circuit, especially to consider the interference problem in the industrial field. The programmable controller (PLC) is a kind of industrial control computer is designed for applications in the industrial design environment, has strong anti-interference ability, high reliability, small volume, is the significant advantages of the electromechanical integration ideal control device, so through the practice and research, this paper proposes a control stepper motor to realize NC system of position control function opinions and methods about using PLC, this pa