q345材料介绍（Q345 materials）.doc

q345材料介绍（Q345 materials） Q345 is low alloy steel (C0.2%), formerly known as 16Mn. Q stands for yielding, and the yield value of the material behind the 345 finger, 345MPa, decreases as the thickness of the material increases. Widely used in bridges, vehicles, ships, buildings, pressure vessels and so on. The difference between Q235 and Q345 1 Q235, the yield strength is 235MPa, the yield strength of Q345 for lower 345MPa (Q for the word Qu Chinese characters, behind the numerical representation of yield limit); 2 and two alloy content is different: Q235 is ordinary carbon steel, Q345 is low alloy steel. Q345B introduction It consists of Q+ numeral + quality grade symbol + deoxidization method symbol. The steel dubbed Q, representing the yield point of steel, behind the digital representation of the yield point value, in units of MPa such as Q235 (s) said the yield point for carbon steel 235 MPa. The necessary grades can be marked behind said deoxidation methods of quality grades and symbols. The quality class symbols are A, B, C, and D respectively. Deoxidation method notation: F means boiling steel; B represents semi killed steel: Z indicates calm steel; TZ stands for special sedation steel; calm steel is not marked; Z and TZ are not standard. For example, Q235-AF indicates a class of rimmed steel. The carbon steel for special purposes, such as steel, marine steel bridge, basically adopt carbon steel structure representation, but added that the final use of steel letters. Brief introduction of carbon steel -----Q345B products: Q345A (GB/T 1591-1994) wt.% performance and application: Q345 is a kind of steel material. It is low alloy steel (c0.2%). It has good comprehensive properties, low temperature performance, cold stamping performance, good weldability and good machinability. It is widely used in bridges, vehicles, ships, buildings, pressure vessels, etc.. Q stands for the yield of this material, and the latter 345 means the yield value of this material, at arou