sf6（sf6）.docVIP

sf6（sf6） Six prevention of sulfur hexafluoride gas hazards Six sulfur dioxide (SF6) gas is one of the six kinds of greenhouse gases found at present. In the use of a large amount of SF6 gas high voltage electric appliance manufacturing industry, due to improper management or use, not for the recovery, according to the correct method of regeneration, the SF6 gas generated at high temperature and under electric arc decomposition of toxic emissions into the atmosphere, the environment for human survival caused pollution and destruction, and adverse influence to the normal operation of electrical equipment and the health of the people. For more thesis, please refer to: 1, overview Since the French chemist Momsen (H.Moissan) and Li Bo (P.Lebeau) burned sulfur dioxide in fluorine gas to prepare six sulfur hexafluoride (SF6) gas in the laboratory in 1900, people have benefited greatly from it. Due to the chemical stability of pure SF6 gas, it has been used for the treatment of pulmonary tuberculosis cavity at the early stage. At the same time, it has attracted much attention because of its excellent insulation and arc extinguishing performance. Starting in 1940 as an insulating medium, has been widely used in power equipment, such as high-voltage circuit breakers, transformers, transformers, capacitors, lightning arresters, contactors, fuses, Guan Daomu and so on. With the increase of the use of SF6 gas, the expansion of the scope, the correct use and management of SF6 gas, and the protection of the environment and personal safety we are relying on, have been mentioned on the important agenda. 2, the nature of SF6 gas Physical properties of 2.1 SF6 gas Pure SF6 gas is a colorless, odorless, basic non-toxic and nonflammable halogen compound. Its relative density is 6.16g/cm3 in the gaseous state (20 degrees C, 0.1MPa), 1400g/cm3 in liquid state (20 DEG C); in the same state, it is about 5 times of the relative density of air. For ease of transportation and storage, SF6 gas