shupaizi（shupaizi）.docVIP

shupaizi（shupaizi） One, four digital tube instructions: XXXX * the first represents CHASE, a total of 6 * second representatives, SCENSE, 8 * No. three or four stands for BANK, a total of 30 * when setting the MIDI channel, the three or four bit represents the MIDI channel, and there are 16 MIDI channels * a CHASE can contain up to 240 SCENSE * a BANK can contain up to 8 SCENSE * a SCENSE can contain up to 192 channels (or 12 SCANNER) SCANNER1: channel 1~ channel 16 SCANNER2: channel 17~ channel 32 And so on SCANNER12: channel 181~ channel 192 * a SCANNER can contain up to 16 channels * display values or percentages when adjusting the slider Two, please pay attention to the operation of the digital screen lights in what state. *BLANKOUT *STEP *PROGRAM *MUSIC TIGGER *AUTO TIGGER Due to limited space, the review continued... If you need the full text of the PDF file, please send it to juny0804@139.com for mail. Van Electronics 2008-5-13 Posted @ 2008-5-13 22:13:00 juny0804 read (5503) | reply (9) | reflect | Trackbacks (0) | editor Last: PCB design considerations Next: Protel PCB is a very practical shortcut key 2008-5-13 22:25:00 Re:DMX512 Chinese Manual Three, DMX512 panel function description 1, SCANNERS Press the SCANNER button, the LED lamp next to the light, which is connected with the output of 8 channels can be regulated, while SCENS is running, if adjustable potentiometer control is OFF, it will not affect the potentiometer output channels, but if the adjustable potentiometer control for ON, the channel output will change with the corresponding adjustable potentiometer change; 2, SCENS according to Jian Press a SCENS key to trigger SCENS or deposit a SCENS, and second digital tube heads display SCENS1-8; 3 、 adjustable potentiometer Adjust the adjustable potentiometer to change the channel output size of DMX. The minimum is 0, the maximum is 255, or eight consecutive channels can be controlled from the 0%-100%, the adjustable potentiometer 1-8; 4, PAGE/SELECT