什么是万向节（What is the universal joint）.docVIP

什么是万向节（What is the universal joint） What is a universal joint? RCFans, China joint is a universal joint English name universal joint, is the realization of variable angle power transmission parts, for the need to change the direction of the axis of the driving position, it is the car driving system of universal gearing joint components. The universal joint is combined with the drive shaft, which is called universal joint drive. The structure and function of the universal joint is somewhat like the joints on the limbs of the human body, which allows the angles between the parts to be connected to vary within a certain range. In order to satisfy the angle change caused by the fluctuation of the power transmission, the steering and the fluctuation of the running of the automobile, the drive axle of the front drive automobile is connected with a cardan joint between the half shaft and the wheel shaft. But due to the axial size, angle requirements and relatively large, single gimbal can make the output shaft and the shaft shaft into the instantaneous angular velocity equal to cause vibration, aggravate the damage of the workpiece, have a lot of noise, so it is widely used by every kind of constant velocity universal joint. On the front drive automobile, each half shaft is provided with two constant velocity universal joints, and the universal joint adjacent to the variable speed drive axle is a half shaft inner universal joint, and the axle shaft is a cardan joint of the half shaft. In the rear drive car, the engine, clutch and transmission are mounted on the frame as a whole, while the drive axle is connected to the frame by means of an elastic suspension. There is a distance between the two axles, which need to be connected. The car running road surface bouncing, load change or two assembly installed position, will make the transmission output shaft and the drive axle main reducer between the transmission input shaft angle and distance change, Cardan drive cars in the