打印机维护保养（Printer maintenance）.docVIP

打印机维护保养（Printer maintenance） Learning is enough to teach, then to teach. High mountains have their own way, and deep waters have their own ferry boats. From thrift to luxury, from extravagance to frugality. Like attracts like., Birds of a feather flock together. Content is not shame measurably. Common sense of printer usage This font: [small] (2005.7.15) I. routine maintenance Because of the good printing effect and low noise, ink jet printer is becoming the preferred object of home printer. In its daily use, the following maintenance items should be paid attention to: 1 、 maintenance of inkjet printer You must make sure that the printer is working on a solid level, and do not place any items at the top of the printer. When printing, the printer must close the front cover to prevent dust from entering the machine or other hard objects, hindering the operation of the printing vehicle and causing unnecessary trouble. Forbidden to plug and print the cable, this will damage the printers print port and PC parallel port, and even will break the PC motherboard. If the print output is not clear, with stripes or other defects, you can use the printers automatic cleaning function to clean the print head, but you need to consume a small amount of ink. If you are not satisfied with the cleaning several times, then the ink may have run out and you need to change the cartridge. 2. Ensure the cleanliness of the use of the environment Using too much dust in the environment can lead to poor lubrication of the guide shaft of the print truck, cause the printing head to be blocked during printing, cause the printing position to be inaccurate or impact the mechanical frame and cause the crash. Sometimes, the crash because the print head did not go back to the initial position, on reboot, let the printer print head back to the initial position (EPSON, boot portion of the printer is to let the car left to run the print cartridge replacement position and then reset or reset after cleaning)