振动公式（Vibration formula）.docVIP

振动公式（Vibration formula） Vibration test machine, vibration test instrument commonly used formula summary published: 10-11-15 source: Hits: 2212 field selection: large and small 1, thrust (F) formula F= (m0+m1+m2+...... A).............................. The formula (1) Type: F - thrust (Ji Zhenli) (N) M0 shaking table movement on the part of the effective mass (kg) M1 auxiliary table quality (kg) M2 specimens (including fixture, installation screws) quality (kg) A acceleration test (m/s2) 2, acceleration (A), speed (V) and displacement (D) exchange formula three vibration parameters 2.1 V A=............................................................ The formula (2) Type: A - test acceleration (m/s2) V speed test (m/s) Omega =2 PI f (angular velocity) Where f is the test frequency (Hz) 2.2 x 10-3 D V=...................................................... The formula (3) Type: V and Omega synonymous with 2.1 D displacement (mm0-p) Dan Fengzhi 2.3 x 10-3 2D A=...................................................... The formula (4) Type: A, D and Omega with 2.1, 2.2 synonymous The formula (4) can be simplified to: Square divided by A=f 250 multiplied by D Type: A and D and 2.3 are synonyms, but the A unit is g 1g=9.8m/s2 So: A = A, then the unit is m/s2 Sweep test smooth crossing frequency calculation formula of vibration level Smooth crossing frequency formula of acceleration and speed of 3.1 FA-V=............................................. The formula (5) Type: fA-V acceleration and velocity smooth crossing frequency (Hz) (A and V and synonymous front). 3.2 formulas of velocity and displacement of smooth crossing frequency ....................................... The formula (6) Type: - acceleration and velocity smooth crossing frequency (Hz) (V and D and synonymous front). 3.3 formulas of acceleration and displacement of smooth crossing frequency FA-D=.......................................... The formula (7) Type: fA-D, acceleration and displacement of smooth crossing