柱问题（Column problem）.docVIP

柱问题（Column problem） Column problem 1, column longitudinal reinforcement anchor into the foundation of the problem Atlas to construct 03G101-1 column longitudinal reinforcement foundation above the top of the required to speak in more detail, but the column longitudinal reinforcement anchored into the basic problem, graph is not introduced, and such problems, some concrete structure view handbooks can not find the details, so it is very necessary to experts ask these questions, but also a lot of engineering and technical personnel of common problems. The column longitudinal reinforcement in the foundation (beam, or beam type raft foundation beam) what is the anchor length? Is it a laE or more? (even someone raised 1.5 times the laE) When the longitudinal anchor length of the column longitudinal reinforcement meets the requirement of anchorage length, can the anchor be straight and not bent anchor? Some people say they can anchor straight, but others say they must turn a right corner. If the column longitudinal reinforcement extends into the foundation, must be bent anchor, then what is the length of the bending part? Some people say that 10d, and in the 03G101-1 atlas thirty-ninth page beam LZ longitudinal reinforcement structure bending length of 12D, whether this provision can be used for the foundation? Similarly, in the 03G101-1 atlas thirty-ninth page beam LZ longitudinal reinforcement structure, the provisions of the straight anchor part length is not less than 0.5 laE, whether this provision can be used for the foundation? When the beam height of the foundation beam is greater than the length of the longitudinal reinforcement of the column, the longitudinal reinforcement of the column can not extend to the bottom of the beam. Is that so? When the anchorage length based beam height is less than column longitudinal reinforcement, column longitudinal reinforcement should be extended to the bottom of the beam, and then turned a bend. The length of the bend, how ma