流程规范（Process specification）.docVIP

流程规范（Process specification） August 2010 - Optical Network - process specification - rules and regulations examination [1-B-B-B] 1, according to the project quality reward and punishment standard management system, the engineer received the user written recognition (according to equipment manufacturers website records shall prevail), reward RMB (B) yuan. A, 50 B, 100 C, 150 D, 200 2, a project supervision software project quality score of 47 points, according to the project quality reward and penalty standard management system, for the quality of the engineers should be fined (d) yuan. A, 30 B, 40 C, 70 D, 100 3, according to the project quality reward and penalty standard management system, unqualified engineering quality problems rectification within the prescribed time without rectification, according to the single project fines () times. B A, 1.5 B, 2 C, 2.5 D, 3 4, according to the project quality reward and penalty standard management system, the hardware engineering quality pass score for () [in accordance with the HUAWEI standard, software out of 35 points] B A, 33 B, 33.5 C, 34 D, 34.5 5, in accordance with the major equipment operation management system, for the violation of the system did not cause project accidents or customer complaints, but by the supervisor or senior inspector found a fine (b) yuan / time A, 400 B, 500 C, 600 D, 1000 6, according to the project accident reporting and handling system (V1.0), the occurrence of an engineering accident, the first person responsible for the project accident must be reported to the direct supervisor in the first time (). B A, 5 minutes B, 10 minutes C, 15 minutes D, 30 minutes 7, according to the quality management system of the incentive standard, check out the quality problem of document clerk, in accordance with the (b) / at the punishment of those responsible for the document; check out the HUAWEI company, according to () yuan / single document to the persons responsible for punishment. () A, 10100 B, 10