磁珠与电感区别(Difference between magnetic beads and inductors).docVIP

  • 8
  • 0
  • 约1.25万字
  • 约 8页
  • 2017-08-18 发布于河南
  • 举报

磁珠与电感区别(Difference between magnetic beads and inductors).doc

磁珠与电感区别(Difference between magnetic beads and inductors)

磁珠与电感区别(Difference between magnetic beads and inductors) The difference between.1 beads and inductors The composition of ferrite bead inductor, consists of a core and a coil, the magnetic AC signal is converted to heat, the AC inductance stored, slow release, so that the inductance is the energy storage component, and magnetic energy conversion devices (consumption). Inductors are mostly used in power filter circuits, magnetic beads are mostly used in signal circuits, magnetic beads are mainly used to suppress electromagnetic radiation interference, and inductors used in this regard focus on restraining conductive interference. Both can be used to deal with EMC and EMI problems. The bead is used to absorb the UHF signals, such as PLL, RF circuit, oscillation circuit, memory circuit with ultra high frequency (DDR, SDRAM, RAMBUS etc.) are required in the power input part and magnetic beads, and the inductance is an energy storage element, used in the LC in low frequency oscillation circuit, filter circuit, the frequency of application the range of little more than 50MHZ. The earth is connected with inductance, the power supply is connected with inductance, and the signal line is often magnetic bead. 3.2.1 chip inductors In the PCB circuit of electronic equipment, a large number of inductive and EMI filter elements are used, including chip inductors and chip magnetic beads. In the case of chip inductors, inductors are required to implement the following two basic functions: circuit resonance and choke reactance. The resonant circuit comprises a resonance generating circuit, an oscillating circuit, a clock circuit, a pulse circuit, a waveform generating circuit, and the like. The resonant circuit also includes a high Q bandpass filter circuit. In order for the circuit to resonate, a capacitor and inductance must exist in the circuit simultaneously. There is a parasitic capacitance at the two ends of the inductor, which is due to the ferrite body between the two electrod

文档评论(0)

1亿VIP精品文档

相关文档