空气分离（Air separation）.docVIP

空气分离（Air separation） brief introduction Say simply, is to put the components of gas in the air separation production, oxygen, nitrogen and argon in a set of industrial equipment. There are rare gas helium, neon, argon, krypton, xenon and radon etc. Edit this paragraph Air can be divided into: 1, air filtration system; dust filter, dust removal and mechanical impurities 2, air compressor system; the power of gas, improve energy, with refrigeration capacity 3, air precooling system; the gas pre cooling, reduce energy consumption, improve the economic efficiency. There is a pre cooling cycle without a throttle throttle ratio of circular economy pre cooling, increase the refrigeration cycle, reduce the heat exchanger work burden, the quantity of cold products can be fully utilized; 4, air purification, air purification system; explosion-proof; many components, in addition to oxygen, nitrogen and other gas components, and water vapor, carbon dioxide, acetylene and a small amount of dust and other solid impurities. These impurities with air entering the air compressor and the air separation device will come great harm, solid impurities will wear air compressor running parts, plug the cooler, reducing the cooling effect; water vapor and carbon dioxide in the air will be frozen precipitation during cooling, gas pipelines and equipment will be blocked, resulting in the air separation device to produce acetylene into the air; device will cause the explosion, so in order to ensure the safe operation of oxygen generator, to remove these impurities is very necessary. The difference between the multicomponent adsorption capacity of gas mixture using solid adsorbent; oxygen and nitrogen output ratio of 1: (2.5~3.5); Effect: the adsorption of moisture in the air, carbon dioxide, acetylene, propane, propylene, heavy hydrocarbon and N2O impurities. 5, compressed air expansion system; refrigeration system, heat exchanger system, in the process of expansion, Waigong output, gas can inc