郑（Zheng）.docVIP

郑（Zheng） Topic three simple radio remote control system A task Production of radio transmitter and receiver design and. 1. wireless remote control transmitter 2. radio remote control receiver Two. 1. basic requirements: (1) the working frequency of fo=6 to 10MHz in an optional frequency. (2) modulation: AM, FM or FSK...... Choose one. (3) output power: not more than 20mW (in the standard 75 ohmwater load). (4): 8, remote controlled equipment instead of using LED, LED light work. (5) the transmitter receiver distance not less than 10m. Play a part (1) of a 2. Road 8 road equipment for light, with remote control command lamp brightness, brightness is divided into 8 levels and the use of digital tube display series. (2) the transmit power (less than 20mW), try to increase the receiving distance. (3) increase the channel anti-jamming measures. (4) to reduce the power consumption. Note: can not be used, sending machine ready. Three, opinion score Project score The basic design requirements and summary report: design and demonstration program, the calculation and analysis of theory, circuit diagram, test method and data analysis results, 50 The actual completion of 50 Play a part (1) completed the 12 Complete section (2) 8 Complete section (3) 5 Complete section (4) 5 The characteristics and innovation of 20 Zheng Yingxun 10:16:38 Topic three simple radio remote control system A task Production of radio transmitter and receiver design and. 1. wireless remote control transmitter 2. radio remote control receiver Two. 1. basic requirements: (1) the working frequency of fo=6 to 10MHz in an optional frequency. (2) modulation: AM, FM or FSK...... Choose one. (3) output power: not more than 20mW (in the standard 75 ohmwater load). (4): 8, remote controlled equipment instead of using LED, LED light work. (5) the transmitter receiver distance not less than 10m. Play a part (1) of a 2. Road 8 road equipment for light, with remote control command lamp brightness, brightness is divid