采油工实操（Actual operation of oil production workers）.docVIP

采油工实操（Actual operation of oil production workers） 1. Take water samples 1. Prepare tools, gauges, appliances 2, check the wellhead process, check the injection well, water distribution process. Check the pressure; check the leaks. 3, wash the bottle, open air valve to smooth sideways, 5 ~ 6L/min flow velocity after 3min sampling, using a sample of water, wash with tools to clean sample bottles more than three times, sampling the correct position (no contact with the sampling port); wash washing tool 4, take water samples to the sampling bottle 2 / 3 height, side close strict vent valve; 5. Cover the sample bottle cap, label, mark the number of the well, the sample and the sampling time, and send it to the laboratory, 6. Clean up the yard, clean up the tools and clean the site Open wells 2, flowing well 1, prepare tools, measuring tools, tools and materials; wipe some recording paper 1 pieces of pipe 1 pen 1 thermometer 1 points 1. Check the diameter of the nozzle, check the three corners of the nozzle, no wax and impurities First, preheat the water jacket furnace 20min., open the separator bypass, back pressure valve, the main shut-off valve, the use of valve wrench opening in the right direction Pass the separator oil outlet valve, balance valve and wax removing vent valve. The reverse separator by-pass valve is in correct direction with the valve wrench opening Fourth, the main line is stable, pour into the separator, slowly open the separator inlet valve and turn off the bypass valve Check the process for leakage; water heater outlet temperature reached 50~60 degrees; bypass valve; slow opening separator inlet valve; the use of valve wrench opening in the right direction After the production is smooth, open the oil outlet valve of the separator, adjust the fire. Make the normal production and fill out the report form Shut in 3, flowing well (sweep line) Turn off the water heater, turn off the production valve, the back pressure valve and the main shut-off valve;