钢筋名称解释0 1、纵筋（The name of the steel bar is explained in 01, longitudinal bars）.docVIP

钢筋名称解释0 1、纵筋（The name of the steel bar is explained in 01, longitudinal bars） The name of the steel bar is explained in 01, longitudinal bars The so-called longitudinal reinforcement along the vertical beam of the upper and lower reinforcement, but the waist except tendons. The main reinforcement can be called longitudinal reinforcement (longitudinal reinforcement) Relatively long, usually longitudinal reinforcement 2, negative tendons Negative reinforcement is the abbreviation of negative moment steel, which plays a role in resisting negative bending moment The negative reinforcement is the beam or the top or the face of the steel bar, because the general mechanics of the lower side of the bottom pull the bending distance is set in the direction of the positive pitch, so the top is the negative bending distance Bottom reinforcement stress bar is what we say (along the direction of the force, but on the cantilever slab) and stress distribution reinforcement is the vertical reinforcement bars (fixed effects, force transfer etc.) bearing negative reinforcement is 1/4 (in that short span reinforced stress bar above) However, the cantilever structure and the beam on the base of the valve plate are exactly the opposite The reinforcement of the plate or beam is the negative rib used to resist the negative bending moment, because the negative bending gives rise to the tensile stress of the plane The negative bar is the steel bar that bears the negative bending moment, generally near the base of the beam or the upper part of the plate, near the support. 3, stand upright bar In general, erect steel beam is used for vertical stirrup, almost appeared in more than three hoop beam is on both sides of the bar is passed, only the central bar reinforcement (that is, we say, if there is no tendons) frame reinforcement, the stirrup not central pier tied, so the frame vertical bars. That is, the stirrups in the beam stand up to form the cage body. Long steel refers to setting up a con