铁道交通工程专业中、初级专业技术资格考试大纲（Syllabus for examination of technical qualification for primary and secondary vocational and technical majors in Railway Transportation Engineering）.docVIP

铁道交通工程专业中、初级专业技术资格考试大纲（Syllabus for examination of technical qualification for primary and secondary vocational and technical majors in Railway Transportation Engineering） Syllabus for examination of technical qualification for primary and secondary vocational and technical majors in Railway Transportation Engineering (Railway Engineering) I. Introduction to urban rail transportation 1. Understanding the origin and development of urban rail transit; 2, understand the pre management of rail transit construction; 3 、 familiar with the urban rail transit system structure; 4, understanding of rail vehicles; 5 、 understanding of electric traction system; 6. Understanding of signals, controls and communications equipment; 7 、 familiar with the organization and operation management of urban rail transit; 8 、 familiar with urban rail transit system, environmental protection, disaster prevention and safety system; 9. Understanding of subway protection laws and regulations; 10. Understanding of sustainable development and urban transportation strategy. Two. Track engineering 1, track structure 1) master the composition of track structure; 2) grasp the function and type of rail; 3) grasp the principle of rail cross section design; 4) familiar with rail damage and reasonable use; 5) to understand the present situation of concrete sleepers in our country; 6) familiar with the laying requirements of concrete wide sleepers in our country; 7) grasp the performance requirements of fasteners; 8) master the technical requirements of ballast ballast; 9) master the deformation mechanism of ballast bed; 10) familiar with the overall structure of the ballast bed; 11) master line orbit classification. 2, the geometrical shape of the track 1) grasp the geometry of the straight track; 2) familiar with the determination principle of curve gauge widening; 3) familiar with the maximum ultra high limit of the outer rail of curved segments. 3 、 mechanical analysis of track structure 1) grasp the