基于matlab的数字式变压器差动保护仿真.docVIP

题 目： 基于Matlab的数字式 变压器差动保护仿真 2006 年 6月 南 京 毕业设计说明书（论文）中文摘要 摘要：Matlab高效处理矩阵运算的能力，使电力系统潮流计算的简化成为可能。作者利用M文件编写了电力系统变压器差动保护程序，并且利用Matlab的外部接口，结合VB编制界面友好、方便的长处，提出了基于MATLAB与VB混合编程的差动保护算法,以期为电力系统故障仿真提供参考。 本文结合实际输电线路仿真模型研究利用Active X技术实现Matlab与VB的数据交换问题。利用Matlab中的Simulink及SPS(simpowersystem)工具箱建立了220kV输电线路、变压器比率制动差动与二次谐波制动保护等仿真模型，获得了三相仿真电压、电流波形及保护动作波形，并将Matlab的仿真结果用VB界面显示。 以上两种新方法充分利用Matlab与VB的优点，便于仿真软件开发与使用。 关键词：Matlab；VB；变压器差动保护；仿真；继电保护 毕业设计说明书（论文）外文摘要 Title: Digital transformer differential action Protection Simulation Based on Matlab Abstract: Matlab’s high-efficient matrix calculation ability makes it possible to realize power flow analysis simplified. The author makes use of m-file to write differential action of transformer, then makes use of Matlab interface technology ,and to combine with the advantage of friendly and convenient on VB.To bring up a differential action protection analysis programs be blend-writed base on MATLAB and VB ,to expect to provide consultation with the fault simulation of the power system. Based on an actual simulation model of power transmission system , using the Active X technology , this paper process a method which can be used to implement data change between Matlab and VB.First ,we build a simulation model which conclude 220kV transmission line power system ，brake on ratio of differential action of transformer and twice harmonic waves to brake protection device .Then we simulate the single phase to ground permanent fault and single phase to ground instant fault in the model to get three phase voltage and current simulation waveforms and the protection operation waveform. Finally we show the simulation results on the Visual Basic software’s interface. Two new methods processed in this paper integrate the advantages of Matlab and VB for the design and using of simulation software. Keywords: Matlab ； VB ；differential action of transformer；simulation ；protective relays 目