大客车车身骨架结构强度分析及其改进设计.PDFVIP

汽 　车 　工 　程 ( ) ( ) 2007年 第 29卷 第 1期 Automotive Engineering 2007 Vol. 29 No. 1 2007019 大客车车身骨架结构强度分析及其改进设计 石 　琴 ,张代胜 ,谷叶水 ,张 　雷 (合肥工业大学机械与汽车学院 ,合肥　230009) [摘要 ] 　在 Unigraphics软件中建立车身骨架的线框模型后 ,用自行编制的接口程序生成命令流文件将模型导 入到 ANSYS环境中 ,建立了车身骨架有限元模型。用有限元理论分析了静态工况下客车车身骨架的强度特性 ,探 讨了承载式车身骨架不同部位的受力特性。提出了通过对骨架结构进行局部改进来提高整体结构强度的方法 ,提 出了对原结构进行改进设计的方案 ,并对改进前后的客车进行了强度试验 ,验证了改进后结构的合理性和可靠性。 关键词 :大客车 ;车身骨架 ;结构分析 ;有限元方法 库 A Study on the Imp rovement of the Strength of Bus Body Sh i Q in, Zhang Da isheng, Gu Y eshu i Zhang L e i 例 School of M echanical and A utom otive Engineering, Hefei U niversity of Technology, Hefei　230009 案 [ Abstract] 　A wireframe model for the body skeleton of a bus is built by utilizing Unigraphics software and E then translated into the finite element model by ANSYS software through the p rogram s designed. The static strength A analysis on the body skeleton is carried out based on finite elementmethod. The loading characteristics of the skele C ton of unibody are investigated. A scheme of local modification in some part of structure is put forward with an aim to enhance the strength of comp lete structure. The strength tests on both modified and original bus bodies are con ducted and the results verify the rationality and reliability of the imp roved structure. 模 Keywords: Bus; Body skeleton; Structure ana lysis; F in ite elem en