安全气囊系统的检修(The maintenance of the airbag system).doc

安全气囊系统的检修(The maintenance of the airbag system).doc

  1. 1、本文档共13页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
安全气囊系统的检修(The maintenance of the airbag system)

安全气囊系统的检修(The maintenance of the airbag system) Maintenance of airbag system in second section Safety rules for repairing airbags Inspection, installation and maintenance must be carried out by professionals. The test lamp, voltmeter and ohmmeter are not to be used in the test. Airbags can only be checked with V.A.G1551/1552 after installation. When checking the airbag, the ground wire must be disconnected. No need to wait after disconnecting the battery. When the airbag is connected to the power supply, there must be no one in the car. Airbags must be loaded immediately after they are removed from the vehicle. The airbag shall be returned to the carrier if the work has to be discontinued. Airbags should not be left unattended. When buffering the airbag, the cushioning surface shall be facing upwards. Airbags must not be opened and repaired. New parts must be used. Damaged or damaged airbags on the hard surface can not be reused. The following regulations shall be observed when replacing airbags: Remove the old airbag and place the cushion face up. Remove the new airbag from the carrier and place the cushion face up. Install the old airbag into the transport equipment. Install the new airbag into the car. The airbag has a service life (see B sticker on the column). If the airbag is replaced, the new label shall be removed and affixed to the old label of the B column. Airbags and self-adhesive labels must be replaced every 14 years. If there is no label on the B column of the vehicle, the airbag shall be indicated in the maintenance manual. Airbags should not be stained with grease, cleaning agents, etc., and can not be placed at temperatures above 100 degrees Celsius (not for a short time). Two 、 airbag treatment (1) replacement of airbag after the accident is triggered; After the accident airbag / tensioner is released, the car with airbags displays the airbag, front and side, or airbags, front and head. The airbag control unit can be used to control the triggering

文档评论(0)

jgx3536 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:6111134150000003

1亿VIP精品文档

相关文档