手机设计论坛2014（Mobile Design Forum 2014）.docVIP

手机设计论坛2014（Mobile Design Forum 2014） Here is what I know about manufacturing and designing mobile phone antennas Japanese funded: Murata, Japan antenna, three provinces of electrical machinery, SMK, yokowov (horizontal tail) Shanghai: Amphenol, RFS, st.rhyme, Jason Kang, an Gang, good day, Shengna, DeXun, Yitian, Eagle tech, de hoon, Vera; Tian li; Suzhou: Hebang, filtronic (LK), Yaodeng, liangte, pusun; Wuxi Shengtianhu technology; Shenzhen: Master Bader, Chen Hong, Wang Qi, Skycroos (Skecos), antecom, Zhongtian Technology, Jin Zhenkai Technology (Korea Companies Office), Alex Hua Tian communications, Tianyuan; verygood, sunway communication Tianjin: Gary, hugelent, Dongguan: Kang Jie, Taiwan Lin electronics, Kai Shuo Shuo Beijing Amos Saint rhyme Tianjin Sambo Electronics (Han Zi), the main mobile phone antenna and mobile phone digital TV antenna Lens: 1., the main screen lens as far as possible using die cutting, the main screen lenses using PMMA, the thickness of 0.8 2. lens: camera lens, as far as possible the use of die cutting, lenses using rigid glass, thickness 0.5 3. camera, camera angle is often 65, and camera lens intersection ratio, the camera after the screen printing area to unilateral small 0.25 4. screen lenses, screen printing area than LCD (A/A) unilateral big 0.5 Casing: 1., shell average material thickness: 1.2, best to do 1.4 2. common screen: shell opening ratio LCD (A/A) 1 unilateral, foam than hole unilateral 0.25 case 3. touch screen: TP casing opening ratio (V/A) of unilateral 0.5, than the shell hole unilateral large foam 0.3-0.5 4. all foam thickness 0.5 specifications, compression thickness of 0.3 5. all double adhesive thickness adopts 0.15 specifications, the model is 3M9495 6. when the enclosure is not required by the ID, the parting line should not be rounded and beveled 7. when the case is broken, if it is possible to scrape the hand in the later period, it should be 0.3*0.3 8. nut adopts: outer diameter 2.3*, length 3.0*, thread M