模具（mould）.docVIP

模具（mould） I. noun interpretation 1. diversion channel Answer: the distributary channel is to divert the melt from the main channel to the cavity direction, which is generally located on the parting surface, and is the flow channel at the end of the main channel and the gate seat 2. cold material hole Answer: is in the plastic injection mold for cold storage material generated during the cold shooting interval, prevent cold material into the cavity of a structure of the quality of plastic parts and the melt can smoothly fill the mould cavity 3. mainstream Road Answer: the main channel is a flow passage from a contact injection machine nozzle to a flow channel. The cross section is generally cylindrical and conical There are 1. injection device on both sides of double pole, double pole, cross from twenty million birds, cross from twenty million birds, etc.. 2. injection mold pouring system has main channel, diversion channel, gate, cold hole and so on The 3. main runner is generally located at the center of the mold, which coincides with the axis of the nozzle of the injection machine 4. the injection mold runner design, from the pressure loss considerations, the circular cross-section channel is best; from the processing convenience, consider the trapezoidal, U, rectangular shunt. There are two kinds of balance and non-equilibrium in the 5. cavity and the distributary channel 6. molten plastic mold molding method, can be divided into compression, injection, injection molding, extrusion molding mold according to the shape of installation in equipment division, can be divided into mobile, fixed, semi fixed according to the number of cavity can be divided into single cavity and multi cavity 7. plastic mould closing die, guiding device has guiding post, guiding cone positioning, usually guided by guide pillar 8. EDM applications, forming, punching and wire cutting 9. generally speaking, the punch and the fixed plate adopt the transition coordination, and the guide post a