思科asa防火墙vpdn拨号配置命令整理（CISCO ASA firewall, VPDN dial configuration, command collation）.doc

下载文档 降价啦

31
0
约5.53千字
约 10页
2017-08-20 发布于河南
举报
版权申诉
保障服务

思科asa防火墙vpdn拨号配置命令整理（CISCO ASA firewall, VPDN dial configuration, command collation）.doc

1、本文档共10页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

思科asa防火墙vpdn拨号配置命令整理（CISCO ASA firewall, VPDN dial configuration, command collation）

思科asa防火墙vpdn拨号配置命令整理（CISCO ASA firewall, VPDN dial configuration, command collation） This article is Adreaman according to the CISCO ASA8.2 configuration document manual in the L2TP and PPPoE functions introduced, sorted out, introduced CISCO ASA (software version 8.2) firewall PPPoE/L2TP these two VPDN characteristics of the configuration steps. Can be compared with this blog before the CISCO PIX firewall VPDN dial configuration command collation contrast view. The CISCO ASA firewall supports dialing as the PPPoE client, supports the dial in as the L2TP server, and only supports the L2TP over IPsec mode dial in and does not support the pure L2TP mode dial in. ASA CISCO document does not introduce PPTP, and the command line is also removed part of the PPTP, it should have canceled support for PPTP. Note: This is not a record of individual real configuration steps, but rather an analysis and annotation of the CISCO configuration manual designed to help us understand the overall configuration. I. configuration of PPPoE 1.1 define the PPPoE services VPDN group VPDN, group, group_name, request, dialout, PPPoE 1.2 specifies the protocol used for PPP authentication VPDN group group_name PPP authentication {chap mschap | | pap} mschap only supports v1. 1.3 bind the PPPoE client user name to the VPDN group VPDN, group, group_name, localname, username 1.4 specify the password for the user VPDN, username, username, password, password, [store-local] The 1.5 interface enables the PPPoE function Interface view IP address PPPoE [setroute] note: relative to PIX6.3, this command has been transferred to the interface view, so no interface name is specified as a parameter. 1.6 specify the VPDN group for the interface Under the interface view, PPPoE client VPDN group grpname note: there is no command under PIX6.3. If you do not specify the VPDN group with this command, you will use a VPDN group randomly. 1.7 starts PPPoE, but the IP address is specified by the user Under the interface