hpux系统管理常用方法小结（Summary of commonly used methods for HPUX system management）.docVIP

下载本文档

5
0
约1.54万字
约 29页
2017-08-20 发布于河南
举报
版权申诉

hpux系统管理常用方法小结（Summary of commonly used methods for HPUX system management）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

hpux系统管理常用方法小结（Summary of commonly used methods for HPUX system management）

hpux系统管理常用方法小结（Summary of commonly used methods for HPUX system management） Network card address configuration 1. configure the IP address Modify the /etc/rc.config.d/netconf file INTERFACE_NAME[0]=lan0 # lanscan display card device name The IP address of IP_ADDRESS[0]= #lan0 SUBNET_NASK[0]= # subnet mask BROADCAST_ADDRESS[0]= # default to the 55 network broadcast address INTERFACE_STATE[0]= # guide when the network card is set to up (start) default is up DHCP_ENABLE[0]= 0 #DHCP whether to start, 0 is not started, 1 is started In the NETCONF file, 2 are not allowed to be modified: OPERATING_SYSTEM=HP-UX LOOPBACK_ADDRESS= If there are multiple network cards in the server, you can add them at the end of the NETCONF file INTERFACE_NAME[1]=lan1 IP_ADDRESS[1]= SUBNET_NASK[1]= BROADCAST_ADDRESS[1]= INTERFACE_STATE[1]= DHCP_ENABLE[1]= 0 2. sets the host name of the system There are 2 main hostname of the system: 1.UUCP (UNIX-to-UNIX, copy) #uname -S myhpux uucp # set the host name #uname -n # view uucp host name 2.internet host name Hostname myhpux Internet # set the host name #hostname # view Internet host name Another method modifies the hostname: Modify the /etc/rc.config.d/netconf file HOSTNAME= myhpux # Internet host name Note: HP strongly suggests that the two host names should be the same /sbin/init.d/net SOP; net start 3. set up gateway /usr/sbin/route add default 20.08.28.98 1 The gateway is automatically added to the system VI /etc/rc.config.d / NETCONF ROUTE_DESTINATION [0]=default ROUTE_GATEWAY [0]=20.08.28.98 ROUTE_COUNT [0]=1 /sbin/init.d/net will execute: /usr/sbin/route add default 20.08.28.98 1 Command netstat -rn to see the routing table You can also use set_parms addl_netwrk to set the default route. Two, HP, UNIX, extended partition 1) to expand the file system, we must first find the logical volumes corresponding to the file system, only to expand the logic first The volume system can extend the file system by expanding the space of the file system. 2)