东北大学15春学期《机械设计基础》在线作业2（Northeastern University spring 15 semester mechanical design foundation online homework 2）.docVIP

东北大学15春学期《机械设计基础》在线作业2（Northeastern University spring 15 semester mechanical design foundation online homework 2） 15 spring semester mechanical design foundation online homework 2 First, radio questions (10 questions, 50 points) 1. the sectional dimensions of plain flat keys are usually chosen from the standard. The torque delivered by the B, the power delivered by the A, the length of the C wheel, and the diameter of the D axis Torque delivered by A. Power delivered by B. Length of C. wheel hub Diameter of D. axis Correct answer: a 2. when designing the gear drive, if the transmission ratio I and the number of teeth and z=z1+z2 remain unchanged, and increase the modulus m, then the gear (). A flexural strength and contact strength increased, B flexural strength unchanged, contact strength increased, C flexural strength and contact strength were unchanged, D bending strength increased, contact strength remained unchanged The flexural strength and contact strength of A. are improved The bending strength of B. is invariable, and the contact strength is improved The flexural strength and contact strength of C. are unchanged D. bending strength increased Correct answer: a 3. in the standard worm drive, when the number of worm heads is constant, if the diameter coefficient of the worm is increased, the transmission efficiency will be improved. A reduces B, increases C, and increases D A. decrease B. raise C. invariant D. increase may also decrease Correct answer: a The 4. () gear train can not be solved by the formula of transformation gear ratio. A fixed axis B hybrid C planetary D differential A. fixed axis B. blend Planet C. D. differential Correct answer: a 5. generally, there are two hinges between the door and the door frame, which belongs to (). A composite hinge; B; local degree of freedom; C virtual constraint; D mechanism; degree of freedom A. composite hinge B. local degree of freedom C. virtual constraint Degree of freedom of D. mechanism Correct answer: a 6.