切忌报怨生活,心态决定幸福（Do not complain about life, attitude determines happiness）.docVIP

切忌报怨生活,心态决定幸福（Do not complain about life, attitude determines happiness） The second badge Carpenter champion skill competition in Anhui Province Reinforcing steel bar theory knowledge examination review question First, judge a problem: (correct tick, wrong call X) 1., the elevation can be divided into absolute elevation and relative elevation, the construction plan is usually marked on the absolute elevation. () 2. structural construction drawings are drawings showing the material, construction, size and construction requirements of load-bearing structures. () 3. concrete component detailing is the basis for steel processing and lashing. () 4. for reinforced concrete members reinforced with complex, in addition to drawing elevation and section map, have reinforced the specifications of each painting and drawing out, for material processing. () 5. with granular or flaky rust after leaving steel pitted, can be used according to the original specifications. () 6. before the construction should be familiar with the construction drawings, in addition to the reinforcement sheet, should also check the factory from forming steel grade, diameter, shape, size, amount and feeding line card. () 7.HRB400 grade deformed steel bars have higher strength and can be used directly in common reinforced concrete structures, or they can be used as prestressed steel bars after cold drawing. () The 8. is the role of lintel door and window wall under the upper part of the weight. () 9. when the block is made of mortar, the cushion block should be tied on the vertical reinforcement. () 10. construction joints refers to the construction of concrete structure, for technical or other reasons after the interruption of construction continued to be poured, the first casting of the hard part and the part of the joint between the formation of the joint. () 11., in order to improve the punching shear capacity of reinforced concrete slabs, stirrup and bent steel bars should be designed according to th