东莞市锦铭五金有限公司简介.pptVIP

DONGGUAN JINMING METAL CO.,LTD ? 2013 All right reserved DONGGUAN JINMING METAL CO.,LTD 《CONTENTS》 DONGGUAN JINMING METAL CO.,LTD NO.76 SANXING ROAD.SONG MU SHAN VILLAGE,DALANG TOWN, DONG GUAN CITY,GUANG DONG PROVINCE,CHINA TEL:076983193372 400-080-3020 FAX:0769WEB:Http:// Http:// E-mail:jmlsc@163.com Fastening?the?world?to?connect?you?and?me ◆Drywall screw needed machines ◆Drywall screw production flow chart ◆Screw material classification ◆Molds used for making screw ◆Secondary Lines (Heat treatment and Electroplating) CONTENTS Drywall screw needed machines 1st:Head Forming Machine, which is used for head forming,also can be used for cutting the screw length.It has the diameter and length ranges according to the part.For example,the machine with 5mm ranges can be used for the part with diameter from 3~5mm,and part length from10~65mm.The machine with 6mm ranges can be used for the part with diameter from 3~6mm,length from 12~100mm.SO if your part is 5mm diameter, length is 100mm,then it must use the machine with 6mm ranges,If you know your parts size ranges, they can recommend the proper head forming machine. 2nd:Thread Rolling Machine, It also has the ranges limit according to the thread length of customer’s products. Drywall screw needed machines Production Flow Chart Material Choosing As per sizes needed Head forming Thread Tolling Heat Treatment if needed Dclivery Packing Sorting out defect parts Electroplating if needed Screw material classification Iron High-carbon Steel Medium-carbon Steel Low-carbon Steel---1022.1018.1008.1006 Stainless steel 400series(410,416) 300series(302,304) Others Cu.(bronze,brass) Aluminum Secondary Lines Heat Treatment if needed (often outsource) Electroplating if needed (often outsource) Molds used for making screw ◆For head forming and thread rolling, it will need separate molds to form the head and threads. Molds can be custom made as per customer’s need DONGGUAN JINMING METAL CO.,LTD ? 2