格栅GRATINGS左面部分.docVIP

格栅：（GRATINGS）左面部分 焊接距为4O.C的定位钢筋（WITH SPACER BARS WELDED 4O.C） 焊接距为2O.C的定位钢筋(WITH SPACER BARS WELDED 2O.C) 注：平面支承由适当角度的钢或铝组成。定位钢筋可能是正方形，长方形，或其他形状。定位钢筋通过按入或焊接使预制槽沟与支承面相连接。他们与支承钢筋有着相同尺寸的开口端或末端。标准定位钢筋的尺寸是1/14和1/4英寸 （CONSRUCTED OF FLAT BEARING BARS OF STEEL OR ALUMIUMAL-BEARS WITH SPACE BARS AT RIGHT ANGLES。SPACES BARS MAYBE SQUAR，RECTANGUR OR OF ANOTHER SHAPE。SPACER BARE ARE CONNECTED TO BEARING BARS BY PRESSING THEM INTO PREPARED SLOTS OR BY WELDING 。THEY HAVE OPEN ENDS OR ENDS BANDED WITH FLAT BARS ABOUT THE SAME SIZE AS WELDED BEARING BARS。STANDARD BAR SPACING ARE 1/14 AND 1/4 IN） 矩形钢筋格栅（焊接或压锁）(RECTANGULAR BAR GRATING)(WELDED OR PRESSURE LOCKED) 定位钢筋的铆接点尺寸大约为7O.C (WITH SPACER BAR RIVETED APPROX 7O.C) 用于普通安装（USED FOR AVERAGE INSTALLATION） 定位钢筋的铆接点尺寸大约为3-1/2OR4（WITH SPACER BARS RIVETED 3-1/2OR4） 用于重型车辆或车轮设备（USED FOR HEARY TRAFFIC AND WHEELEDR EQUIPMENT IS USED） 注：平面支撑钢筋由钢或铝组成，连续弯曲间隔装置或网状钢筋通过铆接与支撑钢筋相连接。他们与支撑钢筋有着相同尺寸的开口端或末端，且焊接至整个末端。一般的钢筋间距是1/6，1/8，2 5/6英寸，许多钢筋格栅并不在公共的行人交通中应用。细孔格栅（1/4英寸）由钢或铝组成，主要用于人行道区域。 NOTE：FLAT BARING BARS ARE MADE OF STEEL OR ALUMINUM AND CONTINUOUS BENT SPACER OR RETICULATE BARS ARE RIVETED TO THE BEARING BARS。USUALLY THEY HAVE OPEN ONES OR ENDS THAT ARE BANDED WITH FLAT BARS OF THE SAME SIZE AS BEARING BARS。WELDED ACROSS THE ENDS NORMAL SPACING OF BARSARE1/6，1/8 2 5/6，IN MANY BAR GRATING CANNOT BE USED IN AREAS PUBLIC PEDESTRAN TRAFFIC （OPENINGS ARE TOO BIG GOR CRUTHES，CANES，WOMENT‘S SHOES ET）CLOSE MESH GRATING IS 1/4 AVAILABLE IN STEEL AND ANMINUM FOR USE PEDESTRAN TRAFFIC AREAS。 网状格栅（铆接）（RETICUCATED GRATING）（RIVETED） 轮廓图（PLAN） 剖面图（SECTION） 注：栅栏由铝合金冲压而成，整个底纹有自然光泽度或阳极电镀，表面顶部实心或开孔，标准表面区宽度是6英寸 NOTE：GRATING IS EXTRUDED FROM ALUMINNM ALLOY IN ONE PIECE WITH INTERGRAL BEAM RIBS ARE CAN HAVE A NATURAL FINISH OR BE ACODIZED 。TOP OF SURFACE MAYBE SOLID OR PUNCHED STANDARD PANEL WITH 6 IN 铝板栅栏（ALUMINUM PLANK GRATING） 法兰区（铝棒）（FLANGE BOLCK）（ALUMINUM-BAR） 支撑梁（BEARING BAR） 圬工凹槽（MASONRY RECESSED） 角钢（ANGLE）