浅谈工程造价控制中存在的问题及对策（Discussion on Problems and Countermeasures in project cost control）.doc

浅谈工程造价控制中存在的问题及对策（Discussion on Problems and Countermeasures in project cost control） Engineering Engineering Technology Discussion on Problems and Countermeasures in project cost control Yanglin Abstract: in recent years, there are a lot of problems in project cost management in our country, what measures to take In order to make the project cost management continuous improvement? The author from the project decision-making, project design, bidding, construction Analysis and Countermeasures of project cost control problems and the corresponding construction completion and settlement of the five stages in. Key words: project cost control design problem of completion There are 1 problems in the construction project cost control There are 1.1 problems in project investment decision-making stage 1.1.1 in the project proposal stage, usually by the construction unit to the company investment planning department This investment is estimated that the content is very simple, often caused by leakage. 1.1.2 in the feasibility study stage, design units, construction units commissioned survey design A feasibility research report, and the preparation of investment estimation, the estimated investment will be made after approval The maximum amount of project cost. But because of this stage in economic analysis and scheme Lord, the engineering quantity is not clear, so the design phase of the investment estimation, this accuracy is poor, at the same time Because of the construction unit is usually not the investment estimation and cost control and process flow of professionals Seriously study the lack of process and plan; sometimes the construction unit in order to offer the project can be approved requirements The design units deliberately underestimated in the investment estimation, increase the estimation inaccuracy. There are 1.2 problems in the project design stage The combination of 1.2.1 technology and economy is not enough. In practical work, are generally designed for peo