3dmax使用技巧经验分享（）.docVIP

3dmax使用技巧经验分享（） 3DMAX experience (2008-08-15 21:48:53) share Tags: 3DMAX lighting and camera scene lighting it classification: PhotoShop 3DMAX experience sharing time: 2007-10-20 - source: network reprint - Author: Anonymous - browse: 3736 - Comments: 0 - Font: [small] A model for a rendering workload, modeling is accounted for more than half of the workload, and the modeling is quite demanding. Because the CAD does not have 3DS or 3DMAX that object hidden features, and editing functions are also poor, looking at the screen with a brightly coloured wireframe will be dazzled, so many people will retreat to their design to the not too familiar with their intentions to draw renderings. Before modeling, first of all, familiar with the building program, the number of layers, height, volume, material, etc., have a general understanding, and if necessary, you can hook a freehand sketch. Then plan the steps of the modeling and the layers, and you can use different layers to match the different textures. To set a snap value in the CAD (I usually set to 50, the building effect is enough), and then sort out the reference plane, which was only one layer, and the layer for a gray color, to avoid confusion with other layers. Align the reference points of the drawing (such as the corner of the column) with the snap points (Im scheduled for 0, 0, 0) to facilitate future operations. The wall model can be drawn using PLINE lines. Some people do not develop good modeling habits, the model is extremely large, the number of faces is 2 to 3 times as much as mine. Because no matter what wall he with a width and thickness of the PLINE line drawing, painting the top of a layer of ARRAY is built up, we think, with a width of PLINE line has 12 sides, so it is terrible. Its better to save your face on computers that do not use 1GHz. When I build a wall, I use a zero width polyline around three lines (sometimes only two lanes) so that the wall has only 6 or 4 faces. It is not always rise to the