abaqus6.4导入外来模型的几点小经验（Some little experience with importing exotic models from ABAQUS6.4）.docVIP

abaqus6.4导入外来模型的几点小经验（Some little experience with importing exotic models from ABAQUS6.4） [a few little experience post]abaqus6.4 to import foreign models! CAE modeling function of ABAQUS6.4 is not too strong, in many cases, also with the help of third party software, complete the second model, but during the import process, there is always more or less problems, recently made several tests in this area, there are a few points, such as under: 1. for the 3D model, pro/e CAD software can build a good model, IGES, sat, stored as step format into ABAQUS can be used directly, personal feeling can use sat or step format model is best not to import IGES files! 2. complex model, when importing ABAQUS, may have broken away from the branch model, not through the geometric model repair will change, and the network is also very difficult, but through the third party processing software HyperMesh, we can achieve the model error in the import good, format HyperMesh geometric model can be imported rather CAD, the software can import formats are very good, and the small problems by the geometry clean! Then add the ABAQUS template in HyperMesh into high quality after the net export InP used directly for ABAQUS, there is a combination of good ideas CAE! 3. sometimes can be imported in this way model: the ANSYS is now in the domestic audience, I think many people will also use ANSYS modeling, at least the most basic can do, can be found that the modeling function of ANSYS ABAQUS is much better than now, especially after the workbench, which is more prominent! So not used ABAQUS modeling friends and will not use professional CAD software can build the friends you want to model directly in the ANSYS, and then import the ABAQUS with its powerful calculation function of it! A. Quxianjiuguo: ANSYS model by HyperMesh net import import abaqus! (fine to the HyperMesh version can be found) B. 2D for the sketch, ABAQUS can also receive IGES format, so do the 2D model in ANSYS, the file---export